A-12030 CNC Tapping Center

A-12030

  • Standard spindle speeds 10,000 rpm
  • Optional spindle speeds
    12,000 / 15,000 / 20,000 rpm / 24,000 rpm
  • Rigid Tapping 4000 rpm
  • Spindle nose taper BT30
  • 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
  • Fully enclosed heat isolated electric cabinet
  • High Speed Arm-type ATC time T-T: 2.2 sec
  • Directly coupled spindle drive system

back
  • cnc
    Naked machine
  • cnc
    Table
  • cnc
    Tool Magazine
  • cnc
    Direct Drive Spindle BT30
  • cnc
    Auto. Roof flush chip purging system
  • cnc
    The 4th Axis(OP)
  • cnc
    CTS Spindle Motor (OP)
  • cnc
    CTS Filtration with Water Tank (OP)
  • cnc
    Oil Cooler
    (OP)
  • cnc
    Oil mist collector
    (OP)
  • cnc
    Damaged cutting tool sensor(OP)
next
MACHINE SPECIFICATIONS
  Unit A12030
Table size mm 1300 x 530
Max. Table load kgf 400
X, Y, Z axis travel mm 1200 x 500 x 350
Table to spindle nose mm 170 ~ 520
Spindle taper   BT30
Pull stud   MAS403 P30T-1 (45o)
Spindle motor Mitsubishi kw 5.5 / 3.7
FANUC kw 3.7 / 2.2
X drive motor Mitsubishi kw 3.5
FANUC kw 3.0
Y drive motor Mitsubishi kw 3.5
FANUC kw 3.0
Z drive motor Mitsubishi kw 3.5
FANUC kw 4.0
Spindle speeds rpm 10000
X, Y, Z axis rapid traverse m/ 48 / 48 / 48
Magazine capacity   20+1
Max. tool weight kg 4
Max. tool length mm 200
ATC time sec 2.2 (T-T)
Net weight kg 4570
Floor space mm 2900 x 3270 x 2625

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.