A5X404 5-axis CNC Tapping Center

A5X404

5-axis CNC Tapping Center

  • Spindle speed STD. 8000rpm
                         OPT. 12000rpm
                                 15000rpm
  • Spindle motor Mitsubishi  7.5/5.5 kw
                          Fanuc       7.5/5.5 kw
                          Siemens 10.5/7.0 kw
  • Rapid traverse X,Y,Z: 48/48/48 m/min
  • X axes travel 400mm
  • Y axes travel 500mm
  • Z axes travel 450mm
  • Tools capacity 24+1 tools
  • ATC time (T-T) 2.4sec
  • Table size Ø320 mm
back
  • cnc
    Machine Appearance
  • cnc
    Naked machine
  • Rotary table
    Rotary table
next
MACHINE SPECIFICATIONS
    Unit A5X404
Table size   mm Ø320 mm
Max. Table load   kgf 75
Max. Workpiece dimennsion (Ø × height)   mm Ø448 × 250
Min. indexing precision of C axis rotary   degree 0.001
Cumulative indexing precision of C axis   sec 15
C axis repeatability accuracy   sec 6
Slope angle of A axis   degree +120 / - 40
Cumulative indexing precision of A axis   sec 45
A axis repeatability accuracy   sec 8
Max. Speeds for A, C axis   rpm 13.3 / 22.2
X, Y, Z axis travel   mm 400 × 500 × 450
3 axes rapid traverse   m/min 48 / 48 / 48
3 axes bidirectional accuracy of positioning   mm VDI 3441
3 axes bidirectional repeatability of positioning   mm VDI 3441
Spindle speeds   rpm 8000
Spindle taper     BT40
Pull stud     MAS 403 P40T-1(45° )
Spindle driving     Direct-drive
Spindle nose to table   mm 40 ~ 490
Spindle center to Z path   mm 570
Spindle motor Mitsubishi kw 7.5 / 5.5
Fanuc kw  7.5 / 5.5
Siemens kw 10.5 / 7.0
X drive motor Mitsubishi kw 1.5
Fanuc kw  1.6
Siemens kw 2.3
Y drive motor Mitsubishi kw 2.2
Fanuc kw  2.7
Siemens kw 2.3
Z drive motor Mitsubishi kw 3.0
Fanuc kw  3.0
Siemens kw 3.3
A drive motor Mitsubishi kw 3.5
Fanuc kw  4.0
Siemens kw 3.3
C drive motor Mitsubishi kw 1.5
Fanuc kw  1.6
Siemens kw 2.3
Tools capacity   tools 24+1
Max. tool weight   kg 5
Max. tool length   mm 250
Max. tool diameter (alternate pocket empty)   mm 80 (120)
ATC time (T-T)   sec 2.4
Tool Change type     Arm type
Tank volume   L 260
Coolant pump rate   W 600 × 2 pcs
Flow rate   L/min 136
Chip flush type     Flushing type
Auto. Chip conveyor     OP
Net weight   kg 4300
Floor space   mm 2170 × 3032 × 2657

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.