AD600-X CNC Tapping Center

AD600-X

Twin-Spindle CNC Tapping Center

  • Spindle speed STD. 10000rpm
                           OPT. 12000rpm
                                    15000rpm
                                    20000rpm
                                    24000rpm
  • Spindle motor M70V-B 5.5/3.7*2kw
                           0iMD 5.5/3.7*2kw
  • Rapid traverse X,Y,Z: 48/48/48 m/min
  • X axes travel

    Single 600 / Twin 300 mm

  • Y axes travel 450mm
  • Z axes travel 350mm
  • Magazine capacity (20+1)*2
  • ATC time (T-T) 2.0sec
  • Table size 950*480mm
back
  • cnc
    Naked machine
  • cnc
    Twin-Spindle
  • cnc
    Water tank
  • cnc
    The 4th Axis(OP)
  • cnc
    CTS Spindle Motor (OP)
  • cnc
    CTS Filtration with Water Tank (OP)
  • cnc
    Oil Cooler
    (OP)
  • cnc
    Oil mist collector
    (OP)
  • cnc
    Damaged cutting tool sensor(OP)
next
MACHINE SPECIFICATIONS
  Unit AD600-X
Table size mm 950 x 480
Max. Table load kgf 250
X axis travel mm Single 600 / Twin 300
Y axis travel mm 450
Z axis travel mm 350
3 axes rapid traverse m/min 48 / 48 / 48
3 axes bidirectional accuracy of positioning mm 0.005 / 300
3 axes bidirectional repeatability of positioning mm ??0.003
Spindle speeds rpm 10000
Spindle taper   BT30
Pull stud   MAS 403 P30T-1(45?X)
Spindle driving   Direct-drive
Twin spindle spacing mm 230
Spindle nose to table center mm 130~480
Spindle centre to z path mm 490
S2 spindle interpolation travel mm ??5
Spindle motor Mitsubishi kw 5.5 / 3.7 x 2
FANUC kw 5.5 / 3.7 x 2
X drive motor Mitsubishi kw 1.5
FANUC kw 1.6
Y drive motor Mitsubishi kw 1.5
FANUC kw 1.6
Z drive motor Mitsubishi kw 3.5
FANUC kw 4.0
W drive motor Mitsubishi kw 1.0
FANUC kw 1.4
Magazine capacity no. (20+1) x 2
Max. Tool weight kg 4
Max. Tool length mm 190
Max. Tool diameter mm 65
Atc time (T-T) sec 2
Tool change type   Arm type
Tank volume l 260
Coolant pump rate w 600 x 2pcs
Flow rate l/min 136
Chip flush type   Flushing type
Auto. chip conveyor   OP
Net weight kg 4200
Floor space mm 1815 x 3032 x 2632

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.