R-4530 CNC Tapping Center

R-4530

  • Standard spindle speeds 10,000 rpm
  • Optional spindle speeds 12,000 / 15,000 / 20,000 rpm / 24,000 rpm / 30,000 rpm (Built in Spindle)
  • Rigid tapping 4000 rpm
  • Spindle nose taper BT30(STD) / BBT30(OP)
  • 3 axes rapid traverse X, Y, Z: 48 / 48 / 60 m/min
  • Fully enclosed heat isolated electric cabinet
  • High Speed mechanical ATC system T-T: M 1.6 sec
    F 2.5 sec
  • Directly coupled spindle drive system
The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
back
  • Naked Machine
  • Tool Magazine
  • cnc
    Direct Drive Spindle BT30
  • cnc
    Built-in Spindle BT30 30,000rpm
    (OP)
  • cnc
    Servo ATC
    (OP)
  • cnc
    The 4th Axis(OP)
  • cnc
    CTS Spindle Motor
    (OP)
  • cnc
    CTS Filtration with Water Tank (OP)
  • cnc
    Oil mist collector
    (OP)
  • cnc
    Damaged cutting tool sensor(OP)
next
MACHINE SPECIFICATIONS
  Unit R4530
Table size mm 500 x 320
Max. Table load kgf 200
X, Y, Z axis travel mm 450 x 300 x 300
Table to spindle nose mm 170 ~ 470
Spindle taper   BT30
Pull stud   MAS403 P30T-1 (45°)
Spindle motor Mitsubishi kw 5.5 / 3.7
FANUC kw 3.7 / 2.2
Siiemens kw 5.5 / 3.7
X drive motor Mitsubishi kw 1
FANUC kw 1.6
Siiemens kw 2.3
Y drive motor Mitsubishi kw 1
FANUC kw 1.6
Siiemens kw 2.3
Z drive motor Mitsubishi kw 2
FANUC kw 3
Siiemens kw 3.3
Spindle speeds rpm 10000
X, Y, Z axis rapid traverse m/min 48 / 48 / 60
Tools capacity tools 12
Max. tool weight kg 3
Max. tool length mm 200
ATC time sec M1.6 / F2.5 (T-T)
Net weight kg 2100
Floor space mm 1200 x 2230 x 2480

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.