R-5130 CNC Tapping Center

R-5130

CNC Tapping Center

  • Standard spindle speeds 10,000 rpm
  • Optional spindle speeds 12,000 / 15,000 / 20,000 rpm / 24,000 rpm / 30,000 rpm (built in spindle)
  • Spindle nose taper BT30(STD)
  • 3 axes rapid traverse X, Y, Z: 48 / 48 / 60 m/min
  • High Speed mechanical ATC system T-T:
    M 1.6 sec F 2.6 sec S 1.7 sec
  • Front door with double-linked(OP)
  • Directly coupled spindle drive system
  • Fully enclosed heat isolated electric cabinet
The R-series has a simple structure which is designed to maximize product quality, It yields high output, is easy to operate and is highly stable.
back
  • Naked machine
  • Front door with double-linked(OP)
  • Location of tranformer(OP)
  • Location of transformer(OP)
  • Location of oil cooler(OP)
  • Water tank
next
MACHINE SPECIFICATIONS
  Unit R5130
Table size mm 600 x 400
Max. Table load kgf 200
X, Y, Z axis travel mm 510 x 400 x 350
X, Y, Z axis rapid traverse m/min 48 / 48 / 60
Spindle speed rpm 10,000
Spindle taper   BT30
Pull stud   MAS403 P30T-1 (45°)
Table to spindle nose mm 150~500
Spindle motor Mitsubishi kw 5.5 / 3.7
FANUC kw
SIEMENS kw
X drive motor Mitsubishi kw 1.5
FANUC kw 1.6
SIEMENS kw 2.3
Y drive motor Mitsubishi kw 1.5
FANUC kw 1.6
SIEMENS kw 2.3
Z drive motor Mitsubishi kw 3
FANUC kw 3
SIEMENS kw 3.3
Magazine capacity no. 14
Max. tool weight kg 3
Max. tool length mm 200
ATC time(T-T) Mitsubishi sec 1.7
FANUC sec 2.6
SIEMENS sec 1.7
Net weight kg 2650
Floor space mm 1600 x 2640 x 2540

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.