S-3030 CNC Tapping Center

S-3030

  • Standard spindle speeds 10,000 rpm
  • Optional spindle speeds 12,000 / 15,000 / 20,000 rpm / 24,000 rpm
  • Rigid tapping: 4000rpm
  • Spindle nose taper: BT30
  • 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
  • High Speed mechanical ATC system T-T: M 1.9 sec
    F 2.6 sec
  • APC time : 3 sec
  • Direct coupled spindle drive system
Dual work stations, rotary worktables, and moving column structure allows operator to effectively reduce idle time needed to change workpieces during machining. Well suited for mass production.
back
  • Naked Machine
  • cnc
    Tool Magazine
  • cnc
    Direct Drive Spindle BT30
  • cnc
    Servo ATC
    (OP)
  • cnc
    CTS Spindle Motor
    (OP)
  • cnc
    CTS Filtration with Water Tank (OP)
  • cnc
    Oil Cooler
    (OP)
  • cnc
    Oil mist collector
    (OP)
  • cnc
    Damaged cutting tool sensor(OP)
next
MACHINE SPECIFICATIONS
  Unit S3030
Table size mm 400 x 250 x 2 pcs
Max. Table load kg 100
X, Y, Z axis travel mm 300 x 250 x 250
Table to spindle nose mm 180 ~ 430
Spindle taper   BT30
Pull stud   MAS403 P30T-1 (45°)
Spindle motor Mitsubishi kw 5.5 / 3.7
FANUC kw 3.7 / 2.2
Siiemens kw 5.5 / 3.7
X drive motor Mitsubishi kw 1.5
FANUC kw 1.6
Siiemens kw 2.3
Y drive motor Mitsubishi kw 1.5
FANUC kw 1.6
Siiemens kw 2.3
Z drive motor Mitsubishi kw 1.5
FANUC kw 1.6
Siiemens kw 3.3
Spindle speeds rpm 10,000
X, Y, Z axis rapid traverse m/min 48 / 48 / 48
Tools capacity tools 14 / 20(OP)
Max. tool weight kg 3
Max. tool length mm 200
ATC time (T-T) sec M 1.9 / F 2.6
APC time sec 3
Net weight kg 3,350
Floor space mm 2760 x 1730 x 2420

  • Tool change time supplied with standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
  • The company reserves the right to modify the specifications / design, subject to change without further notice.
    Actual specifications, based on order content.