feature
- Standard spindle speeds 8000 rpm
- Optional spindle speeds 12,000 /15000 rpm
- Rigid tapping 3000 rpm
- Spindle nose taper BT40
- 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
- Fully enclosed heat isolated electric cabinet
- High Speed Arm-type ATC time T-T: 2.2 sec
- Directly coupled spindle drive system
PRODUCTS
introduction
The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
-b.jpg)
specifications
| Unit | A7040 | ||
|---|---|---|---|
| Table size | mm | 800 x 430 | |
| Max. Table load | kg | 250 | |
| X, Y, Z axis travel | mm | 700 x 400 x 550 | |
| Table to spindle nose | mm | 120~670 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS403 P40T-1 (45°) | ||
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| FANUC | kw | 7.5 / 5.5 | |
| Siiemens | kw | 10.5 / 7.0 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Siiemens | kw | 3.3 | |
| Y drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3 | |
| Siiemens | kw | 3.3 | |
| Z drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 4 | |
| Siiemens | kw | 4.9 | |
| Spindle speeds | rpm | 8000 | |
| X, Y, Z axis rapid traverse | m/min | 48 / 48 / 48 | |
| Tools capacity | tools | 24+1 | |
| Max. tool weight | kg | 5 | |
| Max. tool length | mm | 250 | |
| ATC time | sec | 2.2 (T-T) | |
| Net weight | kg | 3980 | |
| Floor space | mm | 2910 x 1900 x 2700 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
