Feature
Machine Technical Specifications
-
Standard Spindle Speeds ( STD. )
12,000 rpm
-
Standard Spindle Speeds ( OPT. )
15,000 / 20,000 / 24,000 rpm
-
Spindle Motor ( Mitsubishi )
5.5 / 3.7 kw
-
Spindle Motor ( Fanuc )
5.5 / 3.7 kw
-
Spindle Motor ( Siemens )
4.8 kw
-
Rapid Traverse X, Y, Z
48 / 60 / 48 m/min
-
X Axes Travel
400 mm -
Y Axes Travel
610 mm -
Z Axes Travel
380 mm -
Tools Capacity
24+1 tools -
ATC Time ( T-T )
2.5 sec -
Table Size
Ø170
Introduction
Naked Machine
Rotary table( DD Motor )
Full Enclosed Splash Guard ( STD )
& Oil Mist Collector ( OP )
Tool Magazine
Water Tank
CTS Spindle Motor ( OP )
CTS Filtration with Water Tank
( OP )
Specifications
| Unit | HD403-5X | |
| Table Size |
mm | Ø170 |
| Max. Table Load |
kg | 30 |
| Max. Workpiece Dimension ( ø x Height ) | mm | Ø220 x 300 |
| Min. Indexing Precision of C Axis Rotary | deg. | 0.001 |
| Cumulative Indexing Precision of Table | sec | 20 |
| C Axis Repeatability Accuracy | sec | 4 |
| Slope Angle of A Axis | deg. | ±100° |
| Cumulative Indexing Precision of A Axis | sec. | 30 |
| A Axis Repeatability Accuracy | sec. | 8 |
| A / C Axis Speed | rpm | 150 / 200 |
| X, Y, Z Axis Travel |
mm | 400 x 610 x 380 |
| 3 Axes Rapid Traverse | m/min | 48 / 60 / 48 |
| 3 Axes Bidirectional Accuracy of Positioning | mm | 0.005 / 300 |
| 3 Axes Bidirectional Repeatability Repeat Positioning | mm | ±0.003 |
| Spindle Speeds | rpm | 12,000 |
| Spindle Taper | BT30 | |
| Pull Stud | MAS403 P30T-1 ( 45° ) | |
| Spindle Driving | Direct | |
| Spindle Center to Surface Of Table | mm | 190 ~ 570 |
| Spindle Nose to Table Center | mm | -135 ~ 475 |
|
Spindle Motor |
||
| Mitsubishi |
kw | 5.5 / 3.7 |
| Fanuc |
kw | 5.5 / 3.7 |
| Siemens | kw | 4.8 |
| X Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| Y Drive Motor | ||
| Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 |
| Siemens | kw | 3.3 |
| Z Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| A Axis Cutting Torque | Nm | 48 |
| C Axis Cutting Torque | Nm | 29 |
| Tools Capacity | tools | 24+1 |
| Max. Tool Weight | kg | 4 |
| Max. Tool Length | mm | 200 |
| Max. Tool Diameter ( Alternate Pocket Empty ) | mm | 65 ( 80 ) |
| ATC Time ( T-T ) | sec | 2.5 |
| Tool Change Type | Arm Type | |
| Tank Volume | L | 200 |
| Coolant Pump Rate | W | 600 x 2 pcs |
| Flow Rate | l / min | 136 |
| Chip Flush Type | Flushing Type | |
| Auto. Chip Conveyor | OP | |
| Net Weight | kg | 3700 |
| Floor Space | mm | 1835 x 2593 x 2471 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
