Feature
Machine Technical Specifications
-
Standard Spindle Speeds ( STD. )
10,000 rpm
-
Standard Spindle Speeds ( OPT. )
12,000 / 15,000 / 20,000 / 24,000 rpm
-
Spindle Motor ( Mitsubishi )
5.5 / 3.7 kw
-
Spindle Motor ( Fanuc )
5.5 / 3.7 kw
-
Spindle Motor ( Siemens )
4.8 kw
-
Rapid Traverse X, Y, Z
48 / 60 / 48 m/min
-
X Axes Travel
400 mm -
Y Axes Travel
450 mm -
Z Axes Travel
380 mm -
Tools Capacity
24+1 tools -
ATC Time ( T-T )
2.5 sec -
Table Size
400 * 400 mm
Introduction
Naked Machine
360° Rotary Table
Tool Magazine
Rotary Operation Box
Water Tank
CTS Spindle Motor ( OP )
CTS Filtration with Water Tank
( OP )
Oil Cooler ( OP )
Oil Mist Collector ( OP )
Specifications
| Unit | H4030 |
|
| Table Size |
mm | 400 * 400 |
| Max. Table Load |
kg | 200 |
| Max. Workpiece Dimension ( ø x Height ) | mm | Ø480 x 540 |
| Min. Lndexing Angle of Table | degree | 0.001 |
| Cumulative Indexing Precision of Table | sec | 20 |
| Table Repeatability Accuracy | sec | 4 |
| Drive System for Table Exchange | - | |
| Max. Rotation Diameter of APC | mm | - |
| X, Y, Z Axis Travel |
mm | 600 x 400 x 500 |
| Spindle Center to Surface of Table | mm | 90 ~ 540 |
| Spindle Nose to Table Center | mm | 190 ~ 570 |
| 3 Axes Bidirectional Accuracy of Positioning | mm | VDI 3441 |
| 3 Axes Bidirectional Repeatability Repeat Positioning | mm | VDI 3441 |
| Spindle Taper | BT30 | |
| Pull Stud | MAS403 P30T-1 ( 45° ) | |
| Spindle Driving | Direct | |
|
Spindle Motor |
|
|
| Mitsubishi |
kw | 5.5 / 3.7 |
| Fanuc |
kw | 5.5 / 3.7 |
| Siemens | kw | 4.8 |
| X Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| Y Drive Motor | ||
| Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 |
| Siemens | kw | 3.3 |
| Z Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| B Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| Spindle Speeds | rpm | 10,000 |
| B Axis Speed | rpm | 16.6 |
| X, Y, Z Axis Rapid Traverse | m/min | 48 / 60 / 48 |
| Tools Capacity | tools | 24+1 |
| Max. Tool Weight | kg | 4 |
| Max. Tool Length | mm | 200 |
| Max. Tool Diameter ( Alternate Pocket Empty ) | mm | 65 ( 80 ) |
| ATC Time ( T-T ) | sec | 2.5 |
| Tool Change Type | Arm Type | |
| Tank Volume | L | 200 |
| Coolant Pump Rate | W | 600 |
| Flow rate | l / min | 136 |
| Chip flush pump rate | W | 600 |
| Flow rate | l / min | 136 |
| Net Weight | kg | 3700 |
| Floor Space | mm | 1835 x 2593 x 2407 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
