Feature
Machine Technical Specifications
-
Table Size
400 * 400 mm
-
Standard Spindle Speeds
8,000 rpm
-
Optional Spindle Speeds
12,000 / 15,000 rpm
-
Spindle Taper
BBT40
-
Tools Capacity
30+1 pcs -
X / Y / Z Axis Travel
400 / 450 / 380 mm -
Directly Coupled Spindle Drive System
Introduction
360° Rotary Table
Naked Machine
Specifications
| Unit | H4040 |
|
| Table Size |
mm | 400 * 400 |
| Max. Table Load |
kg | 200 |
| Max. Workpiece Dimension ( ø x Height ) | mm | Ø480 x 540 |
| Min. Lndexing Angle of Table | deg. | 0.001 |
| Cumulative Indexing Precision of Table | sec | 20 |
| Table Repeatability Accuracy | sec | 4 |
| Drive System for Table Exchange | | - |
| Max. Rotation Diameter of Apc | mm | - |
| X, Y, Z Axis Travel |
mm | 400 / 450 / 380 |
| Spindle Center to Surface of Table | mm | 110 ~ 560 |
| Spindle Nose to Table Center | mm | 110 ~ 490 |
| 3 Axes Bidirectional Accuracy of Positioning | mm | VDI 3441 |
| 3 Axes Bidirectional Repeatability Repeat Positioning | mm | VDI 3441 |
| Spindle Taper | BT30 | |
| Pull Stud | MAS403 P30T-1 ( 45° ) | |
| Spindle Driving | Direct | |
|
Spindle Motor |
||
| Mitsubishi |
kw | 7.5 / 5.5 |
| Fanuc |
kw | 7.5 / 5.5 |
| Siemens | kw | 7.0 |
| X Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| Y Drive Motor | ||
| Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 |
| Siemens | kw | 4.8 |
| Z Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| B Drive Motor | ||
| Mitsubishi | 1.5 | |
| FANUC | 1.6 | |
| Siemens | 2.3 | |
| Spindle Speed | rpm | 8,000 |
| B Axis Speed | rpm | 16.6 |
| X, Y, Z Axis Rapid Traverse | m / min | 48 / 48 / 48 |
| Tools Capacity | pcs | 30 + 1 |
| Max. Tool Weight | kg | 5 |
| Max. Tool Length | mm | 250 |
| Max. Tool Diameter ( Alternate Pocket Empty ) | mm | 78 ( 120 ) |
| ATC Time ( T-T ) | sec | 4.0 |
| Tool Change Type | Arm Type | |
| Tank Volume | L | 200 |
| Coolant Pump Rate | W | 600 |
| Flow Rate | l / min | 136 |
| Chip Flush Pump Rate | W | 600 |
| Flow Rate | l / min | 136 |
| Net Weight | kg | 3850 |
| Floor Space | mm | 2000 * 2670 * 2475 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
