Feature
Machine Technical Specifications
-
Spindle Speed ( STD. )
8,000 rpm
-
Spindle Speed ( OPT. )
12,000 / 15,000 rpm
-
Spindle Motor ( Mitsubishi )
7.5 / 5.5 kw
-
Spindle Motor ( FANUC )
7.5 / 5.5 kw
-
Spindle Motor ( SIEMENS )
7.0 kw
-
Rapid Traverse X / Y / Z
48 / 48 / 48 m/min
-
X Axes Travel
500 mm -
Y Axes Travel
450 mm -
Z Axes Travel
450 mm -
Tools Capacity
30+1 tools -
ATC Time ( T-T )
2.7 sec -
Table Size
400 * 400 * 2 mm
Introduction
Machine Appearance
Naked Machine
Adopted CAM Type Exchange Mechanism Provide Rapid and Stable Pallet Change
The Rotary Operation Box
Water Tank with Big Volume and Chip Conveyor
Specifications
| Unit | H4040P |
|
| Table Size |
mm | 400 * 400 * 2 PCS |
| Max. Table Load |
kg | 300 |
| Max. Workpiece Dimension ( ø x Height ) | mm | Ø560 x 700 |
| Min. Lndexing Angle of Table | degree | 0.001 |
| Cumulative Indexing Precision of Table | sec | 20 |
| Table Repeatability Accuracy | sec | 4 |
| Drive System for Table Exchange | | Cam Type |
| Max. Rotation Diameter of Apc | mm | 1370 |
| X / Y / Z Axis Travel |
mm | 500 * 450 * 450 |
| Spindle Center to Surface of Table | mm | 100 ~ 550 |
| Spindle Nose to Table Center | mm | 160 ~ 610 |
| 3 Axes Bidirectional Accuracy of Positioning | mm | VDI 3441 |
| 3 Axes Bidirectional Repeatability Repeat Positioning | mm | VDI 3441 |
| Spindle Taper | BT40 | |
| Pull Stud | MAS403 P40T - 1 ( 45° ) | |
| Spindle Driving | Direct | |
|
Spindle Motor |
||
| Mitsubishi |
kw | 7.5 / 5.5 |
| Fanuc |
kw | 7.5 / 5.5 |
| Siemens | kw | 7.0 |
| X Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| Y Drive Motor | ||
| Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 |
| Siemens | kw | 4.8 |
| Z Drive Motor | ||
| Mitsubishi | kw | 2.2 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| B Drive Motor | ||
| Mitsubishi | 2.2 | |
| FANUC | 1.6 | |
| Siemens | 2.3 | |
| Spindle Speed | rpm | 8,000 |
| B Axis Speed | rpm | 27.7 |
| X / Y / Z Axis Rapid Traverse | m / min | 48 / 48 / 48 |
| Tools Capacity | pcs | 30 + 1 |
| Max. Tool Weight | kg | 5 |
| Max. Tool Length | mm | 250 |
| Max. Tool Diameter ( Alternate Pocket Empty ) | mm | 78 ( 120 ) |
| ATC Time ( T-T ) | sec | 2.7 |
| Tool Change Type | Arm Type | |
| Tank Volume | L | 200 |
| Coolant Pump Rate | W | 600 |
| Flow Rate | l / min | 136 |
| Chip Flush Pump Rate | W | 930 |
| Flow Rate | l / min | 250 |
| Net Weight | kg | 5700 |
| Floor Space | mm | 2030 x 4200 x 2450 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
