Feature
Machine Technical Specifications
-
Spindle Speed ( STD. )
10,000 rpm
-
Spindle Speed ( OPT. )
12,000 rpm / 15,000 rpm
-
Spindle Motor ( Mitsubishi )
15 / 11 kw
-
Spindle Motor ( FANUC )
15 / 11 kw
-
Spindle Motor ( SIEMENS )
11.0 kw
-
Rapid Traverse X/Y/Z
48 / 48 / 48 m/min
-
X Axes Travel
560 mm -
Y Axes Travel
500 mm -
Z Axes Travel
560 mm -
Tools Capacity
40+1 tools -
ATC Time ( T-T )
4.0 sec -
Table Size
400 * 400 mm
Introduction
Naked Machine
Rotary Table
40T Tools Cam Type ATC
Direct Drive Spindle
The Rotary Operation Box
Water Tank with Big Volume and Chip Conveyor
Specifications
| Unit | HM4040 |
|
| Table Size |
mm | 400 * 400 |
| Max. Table Load |
kg | 400 |
| Max. Workpiece Dimension ( ø x Height ) | mm | Ø560 x 700 |
| Min. Lndexing Angle of Table | degree | 0.001 |
| Cumulative Indexing Precision of Table | sec | 10 |
| Table Repeatability Accuracy | sec | 4 |
| Drive System for Table Exchange | | - |
| Max. Rotation Diameter of Apc | mm | - |
| X/Y/Z Axis Travel |
mm | 560 * 500 * 560 |
| Spindle Center to Surface of Table | mm | 105 ~ 605 |
| Spindle Nose to Table Center | mm | 100 ~ 660 |
| 3 Axes Bidirectional Accuracy of Positioning | mm | VDI 3441 |
| 3 Axes Bidirectional Repeatability Repeat Positioning | mm | VDI 3441 |
| Spindle Taper | BT40 | |
| Pull Stud | MAS403 P40T-1 ( 45° ) | |
| Spindle Driving | Direct | |
|
Spindle Motor |
||
| Mitsubishi |
kw | 15 / 11 |
| Fanuc |
kw | 15 / 11 |
| Siemens | kw | 11.0 |
| X Drive Motor | ||
| Mitsubishi | kw | 4.5 |
| FANUC | kw | 4.0 |
| Siemens | kw | 4.9 |
| Y Drive Motor | ||
| Mitsubishi | kw | 4.5 |
| FANUC | kw | 4.0 |
| Siemens | kw | 4.9 |
| Z Drive Motor | ||
| Mitsubishi | kw | 4.5 |
| FANUC | kw | 4.0 |
| Siemens | kw | 4.9 |
| B Drive Motor | ||
| Mitsubishi | 2.2 | |
| FANUC | 3.0 | |
| Siemens | 2.3 | |
| Spindle Speed | rpm | 10,000 |
| B Axis Speed | rpm | 33.3 |
| X/Y/Z Axis Rapid Traverse | m / min | 48 / 48 / 48 |
| Tools Capacity | pcs | 40 + 1 |
| Max. Tool Weight | kg | 7 |
| Max. Tool Length | mm | 300 |
| Max. Tool Diameter ( Alternate Pocket Empty ) | mm | 75 ( 150 ) |
| ATC Time ( T-T ) | sec | 4.0 |
| Tool Change Type | Arm Type | |
| Tank Volume | L | 380 |
| Coolant Pump Rate | W | 600 |
| Flow Rate | l / min | 136 |
| Chip Flush Pump Rate | W | 1320 |
| Flow Rate | l / min | 250 |
| Net Weight | kg | 8150 |
| Floor Space | mm | 2550 * 4050 * 2730 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
