Feature
Machine Technical Specifications
-
Table Size
400 x 400 x 2 PCS -
Drive System for Table Exchange
Servo Motor -
Standard Spindle Speeds
10,000 rpm -
Optional Spindle Speeds
12,000 / 15,000 rpm
-
Spindle Taper
BBT40
-
Tools Capacity
60 + 1 pcs -
X / Y / Z Axis Travel
560 / 500 / 560 mm Directly Coupled Spindle Drive System
Introduction
60t Tools Cam Type ATC
Fixture Interface of Pneumatic or Hydraulic Source Apparatus
( 2~8 Ports at One Side of Table )
( OP )
Auto. Pallet Change ( APC )
Naked Machine
Machine Appearance
Specifications
| Unit | HM4040P |
|
| Table Size |
mm | 400 x 400 x 2 PCS |
| Max. Table Load |
kg | 400 |
| Max. Workpiece Dimension ( ø x Height ) | mm | Ø560 x 700 |
| Min. Lndexing Angle of Table | deg. | 0.001 |
| Cumulative Indexing Precision of Table | sec. | 10 |
| Table Repeatability Accuracy | sec. | 4 |
| Drive System for Table Exchange | | Servo Motor |
| Max. Rotation Diameter of Apc | mm | 1370 |
| X / Y / Z Axis Travel |
mm | 560 x 500 x 560 |
| Spindle Center to Surface of Table | mm | 105 ~ 605 |
| Spindle Nose to Table Center | mm | 100 ~ 660 |
| 3 Axes Bidirectional Accuracy of Positioning | mm | VDI 3441 |
| 3 Axes Bidirectional Repeatability Repeat Positioning | mm | VDI 3441 |
| Spindle Taper | BT40 | |
| Pull Stud | MAS403 P40T-1 ( 45° ) | |
| Spindle Driving | Direct | |
|
Spindle Motor |
||
| Mitsubishi |
kw | 15 / 11 |
| Fanuc |
kw | 15 / 11 |
| Siemens | kw | 11.0 |
| X Drive Motor | ||
| Mitsubishi | kw | 4.5 |
| FANUC | kw | 4.0 |
| Siemens | kw | 4.9 |
| Y Drive Motor | ||
| Mitsubishi | kw | 4.5 |
| FANUC | kw | 4.0 |
| Siemens | kw | 4.9 |
| Z Drive Motor | ||
| Mitsubishi | kw | 4.5 |
| FANUC | kw | 4.0 |
| Siemens | kw | 4.9 |
| B Drive Motor | ||
| Mitsubishi | 2.2 | |
| FANUC | 3.0 | |
| Siemens | 2.3 | |
| Spindle Speed | rpm | 10,000 |
| B Axis Speed | rpm | 33.3 |
| X/Y/Z Axis Rapid Traverse | m / min | 48 / 48 / 48 |
| Tools Capacity | pcs | 60 + 1 |
| Max. Tool Weight | kg | 7 |
| Max. Tool Length | mm | 300 |
| Max. Tool Diameter ( Alternate Pocket Empty ) | mm | 75 ( 150 ) |
| ATC Time ( T-T ) | sec | 4 |
| Tool Change Type | Arm Type | |
| Tank Volume | L | 380 |
| Coolant Pump Rate | W | 600 |
| Flow Rate | l / min | 136 |
| Chip Flush Pump Rate | W | 1320 |
| Flow Rate | l / min | 250 |
| Net Weight | kg | 10300 |
| Floor Space | mm | 2575 x 4680 x 2730 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
