Feature
Machine Technical Specifications
-
Table Size
2100 x 430 mm
-
Standard Spindle Speeds
10,000 rpm
-
Optional Spindle Speeds
12,000 / 15,000 / 20,000 / 24,000 rpm
-
Spindle Taper
BBT30
-
Tools Capacity
20 pcs -
X / Y / Z Axis Travel
2000 / 400 / 350 mm -
Directly Coupled Spindle Drive System
Introduction
Ergonomically Movable Operation Box
Ergonomically Movable Operation Box
Water Tank
Servo ATC
Naked Machine
Specifications
| Unit | E20030 |
|
| Table Size |
mm | 2100 x 430 |
| Max. Table Load |
kg | 800 |
| X, Y, Z Axis Travel |
mm | 2000 x 400 x 350 |
| Table Spindle to Nose | mm | 150 ~ 500 |
| Spindle Taper | BT30 | |
| Pull Stud | MAS403 P30T-1 ( 45° ) | |
|
Spindle Motor |
|
|
| Mitsubishi |
kw | 5.5 / 3.7 |
| Fanuc |
kw | 5.5 / 3.7 |
| Siemens | kw | 4.8 |
| X Drive Motor | ||
| Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 |
| Siemens | kw | 3.3 |
| Y Drive Motor | ||
| Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 |
| Siemens | kw | 2.3 |
| Z Drive Motor | ||
| Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 |
| Siemens | kw | 3.3 |
| Spindle Speeds | rpm | 10,000 |
| X, Y, Z Axis Rapid Traverse | m/min | 36 / 48 / 60 |
| Magazine Capacity | no. | 20 |
| Max. Tool Weight | kg | 3 |
| Max. Tool Length | mm | 200 |
| ATC Time ( T-T ) | sec | 2.2 |
| Tank Volume | L | 292 |
| Net Weight | kg | 7800 |
| Floor Space | mm | 4420 x 2970 x 2775 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
- Actual specifications, based on order content.
