VMC 3 Axis Machine
feature
- Standard spindle speeds 8,000 rpm
- Optional spindle speeds 12,000 /15000 rpm
- Rigid Tapping 3000 rpm
- Spindle nose taper BT40
- 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
- Fully enclosed heat isolated electric cabinet
- High Speed mechanical ATC system T-T: M 2.5 sec
F 3.5 sec
- Directly coupled spindle drive system
PRODUCTS
introduction
specifications
Unit | R12040 | ||
---|---|---|---|
Table size | mm | 1300 x 530 | |
Max. Table load | kg | 400 | |
X, Y, Z axis travel | mm | 1200 x 500 x 400 | |
Table to spindle nose | mm | 140 ~ 540 | |
Spindle taper | BT40 | ||
Pull stud | MAS403 P40T-1 (45°) | ||
Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
FANUC | kw | 7.5 / 5.5 | |
Siemens | kw | 7.0 | |
X drive motor | Mitsubishi | kw | 3.5 |
FANUC | kw | 3.0 | |
Siemens | kw | 3.3 | |
Y drive motor | Mitsubishi | kw | 3.5 |
FANUC | kw | 3.0 | |
Siemens | kw | 3.3 | |
Z drive motor | Mitsubishi | kw | 3.5 |
FANUC | kw | 4.0 | |
Siemens | kw | 4.8 | |
Spindle speeds | rpm | 8000 | |
X, Y, Z axis rapid traverse | m/min | 48 / 48 / 48 | |
Magazine capacity | 14 | ||
Max. tool weight | kg | 3 | |
Max. tool length | mm | 250 | |
ATC time | sec | M2.5 / F3.5 (T-T) | |
Net weight | kg | 4620 | |
Floor space | mm | 2900 x 3270 x 3000 |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.